Does Nikon D300 have built-in flash?

Does Nikon D300 have built-in flash?

Built into the D300 is an unusually capable pop-up flash unit, which operates in one of five main modes: Front-Curtain Sync, Red-Eye Reduction, Red-Eye Reduction with Slow Sync, Slow Sync, and Rear-Curtain Sync. In all flash modes, the flash fires with every exposure.

What sensor does the Nikon D300 have?

CMOS sensor

Effective pixels 12.3 million
Image sensor CMOS sensor, 23.6 x 15.8 mm; total pixels: 13.1 million; Nikon DX format
Image size 4,288 x 2,848 [L], 3,216 x 2,136 [M], 2,144 x 1,424 [S]

How do I use the flash on my Nikon d780?

Using an On-Camera Flash

  1. Mount the unit on the accessory shoe. See the manual provided with the unit for details.
  2. Turn on the camera and flash unit.
  3. Adjust flash settings.
  4. Adjust shutter speed and aperture.
  5. Take pictures.

What is Afaf-on mode on Nikon D300?

AF-ON Focuses while you press the AE-L/AF-L button. Flash Off Doesn’t fire the flash so long as you hold the AE-L/AF-L button. Bracketing burst In single frame mode, the D300 goes off and shoots an entire bracketing sequence as set elsewhere.

What kind of Flash does Nikon D300 have?

Nikon D300 Flash. Built into the D300 is an unusually capable pop-up flash unit, which operates in one of five main modes: Front-Curtain Sync, Red-Eye Reduction, Red-Eye Reduction with Slow Sync, Slow Sync, and Rear-Curtain Sync. Front-Curtain Sync fires the flash at the beginning of the exposure, with every shot.

How do I adjust the brightness on my Nikon D300 flash?

Holding down the Flash Mode button while turning the Sub-command dial adjusts the overall brightness of the flash from -3 to +1 EV in one-third-step increments. Besides the main flash modes listed above, the D300’s onboard speedlight can also be used in manual mode, as a repeating flash, or as a commander in Nikon’s Creative Lighting System.

Can the Nikon D300 be used as a stroboscope?

The D300’s onboard speedlight can be used as a stroboscope, using the Repeating Flash option on custom setting menu e3. Through this menu, you can set the power level from 1/128 to 1/4 power, the number of flashes from 2-35, and the frequency of flash pops from 1 to 50 Hz (1-50 pops/second).