How do I access PERC?
To access the PERC BIOS menu, a keyboard shortcut has to be pressed during server startup. To access the Configuration Utility for PERC Series 7, 8, 9: In BIOS mode: press Ctrl+R during startup. In UEFI mode press F2 to enter System Setup.
What is PERC S130?
The Dell PowerEdge RAID Controller (PERC) S130 is an economical RAID solution for the Dell PowerEdge systems. The S130 controller supports up to ten SATA HDDs or SATA SSDs depending on your system backplane configuration. PERC S130 specifications. Supported operating systems. Supported PowerEdge systems.
Does PERC H330 support RAID 6?
PERC H330 supports real-time RAID monitoring and hardware inventory. Trusted Dell PERC reliability with minimal maintenance effort Eight-port 12Gbps PCI Express RAID controller supporting 3Gbps, 6Gbps and 12Gbps SAS, and 3Gbps and 6Gb/s SATA hard-disk or solid-state drives.
How many personality modes the PERC 9 Series can support?
two personality modes
PERC 9 series of cards support two personality modes.
How do I access my Dell RAID controller?
When these systems are configured in UEFI BIOS mode, the RAID setup is accessed from the F12 pre-boot menu. Press F12 on power up while at the Dell logo splash screen. Then, select “Device Configuration” from the list shown in the F12 pre-boot menu.
How do I access the BIOS on a Dell server?
To access the BIOS system setup, press the F2 key while the system is powering on. From the Main menu screen, select System BIOS. Load the default settings by selecting Default. Press the Esc key to return to the System BIOS screen.
How do I enable PERC S130?
Entering the DELL PERC S130 Configuration Utility
- Turn on the system.
- While the system starts up, press to enter System Setup. The list of menu items in the System Setup Main Menu screen is displayed.
- Click Device Settings.
- Click Dell S130 Configuration Utility.
What is a Dell PERC 5 controller?
Overview The Dell™ PowerEdge™ Expandable RAID Controller (PERC) 5 family of controllers offers redundant array of independent disks (RAID) control capabilities. The PERC 5 Serial Attached Small Computer System Interface (SAS) RAID controllers support SAS devices and Dell-qualified SATA devices.
What does PERC 5 stand for?
The Dell™ PowerEdge™ Expandable RAID Controller (PERC) 5 family of controllers offers redundant array of independent disks (RAID) control capabilities. The PERC 5 Serial Attached Small Computer System Interface (SAS) RAID controllers support SAS devices and Dell-qualified SATA devices.
What operating systems does the Dell™ PowerEdge™ expandable RAID Controller (PERC) 5 support?
The Dell™ PowerEdge™ Expandable RAID Controller (PERC) 5 family requires software drivers to operate with the Microsoft®Windows®, Red Hat®Enterprise Linux®, and SUSE®Linux operating systems. This chapter contains the procedures for installing the drivers for the following operating systems.
Does the PERC 5/i adapter have a backup unit?
NOTE: The PERC 5/i Adapter will have a ba ttery backup unit (BBU) when installe d on a PowerEdge server and will not have one when installed on a Dell Precision™ workstation or a PowerEdge SC server. 1 Unpack the PERC 5/i Adapter and check for damage.