How do I fix the paper jam error on my Kodak printer?

How do I fix the paper jam error on my Kodak printer?

How to clear paper jam in kodak printer

1. Step 1: Switch off the printer.
2. Step 2: Open the rear access door.
3. Step 3: Remove the paper.
4. Step 4: Reinstall the rear access door.
5. Step 5: Reconnect all the wires and start the printer again.
6. We hope you have gathered valuable information from this article.

Why is my Kodak printer dock not working?

Kodak PD 450 Printer Dock Not Responding To solve this issue: Restart the printer once. If the issue persists, unplug the power cord, and plug it back. try restarting your computer.

How do you remove the cassette from a Kodak dock?

Answer: The paper cassette for Kodak Dock Plus photo printer can be removed by opening the cartridge door on the side of the printer and pulling out the cartridge while pinching the clip of the cartridge.

Why is my Kodak printer blinking red?

The battery LED indicator will blink red until the battery is fully charged. – Your KODAK PRINTOMATIC may take up to 2 hours to fully charge. – When the battery power dips below 10%, the battery LED indicator will glow red and the camera will not print. At 2% power, your camera will automatically shut off.

Why does my Kodak mini printer keep saying replace cartridge?

In case the message still appears after the installation of a new cartridge, the error is a result of improper detection of the refilled level of ink by the inkjet chip. It means that the printer can no longer print because of low level of ink.

How do I remove the paper tray from my Kodak Instant Dock printer?

Answer: To remove the paper tray from the Kodak Dock Plus photo printer, please hold the printer with one hand and hold the paper tray with the other hand. Then, pull the paper tray towards the side while holding the Kodak Dock Plus printer still.

What does the Kodak EasyShare printer dock do?

Docking and charging your EasyShare digital camera The Kodak EasyShare printer dock is compatible with Kodak EasyShare CX/DX6000/7000 series and LS600/700 series digital cameras. Docking your camera lets you make prints directly from the camera, transfer pictures from the camera to the computer, and charge the camera battery.

How do I print from a Kodak EasyShare printer?

The Kodak EasyShare printer dock series 3 o ffers PictBridge technology, which lets you print from any PictBridge compatible camera or device. 1Plug the USB connector from the PictBridge compatible device into the USB device connector located on the side of the printer dock.

What is included in the Kodak EasyShare package?

DC-in, power connector, ii, 3 disposal and recycling of batteries, 50 of printer dock, 51 docking and charging the camera, 10 door cartridge, ii, 4 paper tray, i, 7 E EasyShare software. See Kodak EasyShare software

How do I pack the printer dock for a trip?

1Disconnect the power and remove all cables. 2Remove the paper tray from the printer dock; close the paper tray cover and the paper tray door on the printer dock. 3Repack the printer dock in the original packing box, or use the optional printer dock travel bag.