Can you mix brands of shocks?
Using two different shocks or struts on your car or truck can be done safely. Unless you’re a NASCAR driver only making left turns, you don’t want one side of your car’s suspension to perform differently than the other.
Can I mix and match shocks?
Q. Can I mix and match different kinds of units? A. Yes, you can use one design on the front and one on the rear.
Do shocks fit all cars?
When people speak casually about vehicle suspension, they often throw around the terms “shocks” and “struts” as if they are the same thing, or interchangeable. They’re not. Every wheel on your vehicle has either a shock or a strut – never both, never neither.
Can I just replace shocks?
You can get identical replacements of the shocks you have in your car currently, but taking the time to change out your shocks is also a good opportunity to perform any upgrades, if you’re interested. Performance shocks are appropriate for heavy-use daily drive vehicles, especially trucks.
Are front and rear shocks different?
They’re found attached to the wheel. If the front two look different than the back two, then you have struts up front and shocks in the rear. If they all look the same, then it’s probably four struts.
Do you have to replace shocks in pairs?
Shocks and struts should always be replaced in pairs or, better yet, all four, for even, predictable handling and control. After all, all four have been on the vehicle for the same number of miles and worked under the same conditions.
Can you change shocks without a jack?
You can definitely do it. I just had my shocks rebuilt and watched him remove and install the rear ones without taking off the wheels.
Which shocks should I replace first?
Shocks and struts should always be replaced at the same time. Unlike some steering and suspension components, the left and right shocks/struts tend to wear down at the same rate. If the left shock or strut is damaged, there’s a good chance the right side also needs to be replaced.
Are shocks sold in pairs?
Does my vehicle have shocks or struts? Each wheel will either have a strut or a shock. They come in pairs; if you have a shock on the rear left wheel, you will also have a shock on the rear right wheel. However, your vehicle may have shocks on one axle and struts on the other axle.
Can I replace one shock absorber?
It’s not necessary, but it’s usually recommended to replace them in pairs, for example, both front struts or both rear shocks. If you replace only one shock absorber, it may create “unevenness” from side to side when driving over bumps.
What are the best shocks for trucks?
1 Best Shocks for Trucks: Monroe Gas-Magnum Truck Shock Absorbers 2 Best Shocks for Lifted Trucks: Fox 2.0 Performance Shocks 3 Best Off Road Shocks: Bilstein 5100-Series Shock Absorbers 4 Best Shocks for Towing: Gabriel Spring-Assist Load Carrier Shocks 5 Best Factory Replacement Shocks: Monroe Monro-Matic Plus Shock Absorbers
Where can I buy shock absorbers?
Shockwarehouse, America’s Number 1 Shock and Strut Superstore, sells shock absorbers, struts and air suspension components for all types of cars, trucks, RVs and motorhomes, including specialized parts for lifted trucks, sports applications and transit/commercial vehicles.
Are shocks and struts expensive?
Answer: Considering that there are pretty expensive parts of every vehicle, shocks and struts are not the expensive after all. 10-Q: Is material of shocks and struts important? Answer: Of course is it!
How much does it cost to replace front shocks?
These shocks come at a great value on Amazon, costing only around $25 – $30 on average. As per the customer reviews, many have been left more than satisfied, claiming that the shocks were an easy installation, and that they improved the control and ride of their vehicle almost instantly.