How do I print envelopes from bypass tray?
Open the bypass tray. Slide the side guides outward, then load envelopes with the print side up, and push in until it stops against the printer. Envelopes whose flaps are open must be printed with the flaps open, and envelopes whose flaps are closed must be printed with the flaps closed.
How do I print from Xerox bypass tray?
Insert the paper into the bypass tray and adjust the guide-rulers to fit the paper as needed. Once the paper is inserted into the tray, the Xerox Copier will prompt you to confirm the paper size (e.g. 11″ x 17″), type (e.g. plain), and color (e.g. white) in the Bypass tray. If it’s correct, Press Confirm.
How do you put paper in tray 5?
Open Tray 5, then pull out the extension tray for larger paper sizes. Remove any paper that is a different size or type. Move the width guides to the edges of the tray. Load the paper in the tray.
Why won’t my printer Print from the bypass tray?
The Tray 5 (Bypass Tray) needs to have the same paper the document selected loaded in it. As well you must select Tray 5 (Bypass Tray) from Printer Properties and also in Page Setup. Ensure Correct Paper is loaded in Tray 5 (Bypass Tray).
Is it possible to print on envelope?
You can choose a computer program to print an address on a single envelope, which you load into your printer’s paper input tray. Or, you can do a Mail Merge and print addresses on a sheet of adhesive labels, which you load into your printer’s paper input tray. You then attach each label to an envelope.
How do I improve the print quality of my envelopes?
Print quality depends on the quality and construction of the envelopes. If you do not get the desired results, try another envelope brand. Maintain constant temperatures and relative humidity. Store unused envelopes in their packaging to avoid excess moisture and dryness which can affect print quality and cause wrinkling.
How do I set the orientation of my envelopes?
Note: For envelopes to print correctly, when you load envelopes with the flaps open, in the print driver, set the orientation as needed. To flip the images, in the print driver, select Rotate Image 180 Degrees. At the control panel, select the correct paper size, type, and color. Ensure that the paper type is set to Envelope.
How do I print on an envelope?
At the control panel, select the correct paper size, type, and color. Ensure that the paper type is set to Envelope. To confirm the settings, touch Confirm. From the computer, in the print driver software, select Envelope as the paper type before sending the job to the printer.