How do you reset the page counter on a Brother printer?

How do you reset the page counter on a Brother printer?

Open the front cover of the printer (to access cartridges). With the front cover open, simultaneously press the Secure and Cancel buttons. The reset menu will now appear on the LCD display. Scroll through the menu to select a color and yield to reset.

How do I reset my Brother DCP T310?

DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W

1. Press Menu.
2. Press or to select the following: Select [Initial Setup]. Press OK. Select [Reset]. Press OK. Select the reset option you want to use. Press OK.
3. Press for [Reset] to confirm.
4. Press for [Yes] to reboot the machine. The machine restarts.

Why has my Brother printer stopped working wirelessly?

The network connection between your computer and the wireless router may be unavailable or set up incorrectly. If you replaced your wireless router or access point, or changed its settings, reconnect your Brother machine to the new wireless router or access point.

What causes printing errors?

Corrupt data in the spool/printing tray might be causing this service to stop. The other most probable reason for the printing error is the connection between your computer and the printer. This can be the printer drivers or the USB port drivers.

Why is there an error with my printer?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

What is Error 46 on Brother printer?

Machine Error 46 indicates that the ink absorber pad is full and needs replacing. You will need an engineer to replace this. If your machine is out of warranty, please contact Brother Customer Service from “Contact Us”. The ink absorbers hold liquid and dried ink after it has been purged from the print head.

What does machine error 46 mean?

( “Unable to Change” “Unable to Clean” “Unable to Init” “Unable to Print” “Unable to Scan” )? If the LCD displays “Machine Error 46”, the ink absorber pad is full and needs replacing. please refer to “How do I clear Machine Error 46?”

What should I do if my brother printer won’t print?

Please contact Brother Customer Service from “Contact Us”. 2-7. If the print head is on the right side. The print head is positioned at the far right hand side, you cannot move it. The machine has a mechanical malfunction and will require repair. Please contact Brother Customer Service from “Contact Us”.

How do I schedule a replacement or repair for my brother?

If in warranty, contact Brother Customer Support or locate a Brother Authorized Service Center to schedule product replacement or repair. If out of warranty, locate a Brother Authorized Service Center .

How do I clear machine error 46 from the LCD?

If the LCD displays “Machine Error 46”, please refer to “How do I clear Machine Error 46?” Check for foreign objects, such as a paper clip or scrap of paper, inside the machine. Unplug the machine from the power outlet and open the scanner cover by pulling up on the lower right corner of the cover.

What is purge counter on Brother printer?

What is a purge counter & how do I reset it? As the printer effectively counts the number of print and clean cycles, this is done by something called the purge counter. The purge counter can be reset using the menu system on your printer via the LCD panel.

How do I reset my brother DCP 195c printer?

1. Press the Menu, then Mono Start key then press the UP arrow key 4 times to make the machine enter the maintenance mode and “ERROR 46” pops-up in the display. 4. Select 2 and push OK, Select 7 and push OK, 8 and push OK, select 3 and push OK and the purge counter is now reset to 00000.

How do you reset the drum counter on a Brother DCP 7040?

If your Brother machine has a numeric keypad: Press 1 to reset the drum counter. If your Brother machine doesn’t have a numeric keypad: Press the Up Arrow Key to reset the drum counter.

Why won’t my Brother printer recognize the toner cartridge?

Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!