What do broken white markings on the road mean?
White lane markings are the most common. Solid white lines define lanes of traffic going in the same direction, or they show you the location of the shoulder of the road. Broken or “dotted” white lines are used to show the center line between lanes.
Can you drive over broken white lines?
Broken White Line: you may change lanes if it is safe to do so. Solid White Line: requires you to stay within the lane and also marks the shoulder of the roadway.
What is a broken white lane line?
A broken white line separates lanes traveling in the same direction. Channelized Left Turn Lanes is a five-lane roadway is shown with the fifth, center lane used for left turns. Arrows show that the direction of travel is two through lanes in each direction and left turns from the center lane.
What does a broken road line mean?
White Lines A broken white line marks the middle of the road. When this line becomes longer, and the gaps get smaller, this means that there is a hazard close ahead. You should not cross this line unless you can see that the road ahead is clear and you wish to overtake another vehicle or turn off the road.
What do different lines mean on the road?
A solid yellow line indicates that passing is prohibited. A dashed yellow line indicates that passing is allowed. White lines separate lanes for which travel is in the same direction. A double white line indicates that lane changes are prohibited. A single white line indicates that lane changes are discouraged.
When can you legally cross a solid white line?
You may cross the line if necessary, provided the road is clear, to pass a stationary vehicle, or overtake a pedal cycle, horse or road maintenance vehicle, if they are travelling at 10 mph (16 km/h) or less. Areas of white diagonal stripes or chevrons painted on the road.
What do the lines in the middle of the road mean?
A broken white line marks the centre of the road. Longer broken white lines in the centre of the road indicate a hazard ahead. A double solid white lines in the centre of the road. This means you MUST NOT cross or straddle it unless it is safe and you need to enter adjoining premises or a side road.
What are rumble strips used for?
Rumble strips, also known as sleeper lines, audible lines, “the corduroy”, growlers, and “woo woo” boards, are a road safety feature to alert inattentive drivers of potential danger, by causing a tactile vibration and audible rumbling transmitted through the wheels into the vehicle interior.
What does this white arrow on the road mean?
Explanation: This curved arrow on the road indicates the direction that traffic should pass solid double white lines that are coming up.
What does two broken white lines mean?
Short broken white lines that travel down the middle of the road are the most common. Double broken white lines in the centre of a road are alerting you to continuous white lines up ahead. You can overtake on double broken white lines, but you should be aware that a solid white is coming up.
What does a broken white line mean on a road?
True to its color, the broken white line means that you are free to change lanes, overtake vehicles or in case you have by mistake made a wrong turn you can simply make a U-turn. A continuous white line indicates the following things: No Overtakes. Strictly No U-Turns allowed.
Where can I find solid white stop lines?
Solid white stop lines are also located at traffic lights. The stop line although similar to that found at junctions as above, is not as wide. See traffic lights and how they work for further information.
Can You Drive between the white lines on the road?
You should always drive between them. Chevrons painted on the road have white diagonal stripes and they are used to separate traffic lanes or to protect traffic turning right. If the area has a broken white line border then you should not enter the area unless it is safe and necessary to do so.
When was the first white line on a road?
In the UK, the first “white line” road markings appeared on a number of dangerous bends on the London-Folkestone road at Ashford, Kent, in 1914. In England, the idea of painting a centre white line was first experimented with in 1921 in Sutton Coldfield, Birmingham.