What is a Compton bridge?
Compton Compensated Custom Bridges are made in the USA from solid Stainless Steel, Copper, Brass, Aluminum and Titanium. The concept of the solid bridge is to eliminate all the small parts that contribute to tone and sustain loss. The bridges are also designed to match your fret board radius.
Do guitar bridges matter?
The Bridge Is Crucial In Determining a Guitar’s Feel Although the tension required to bring strings of the same gauge up to pitch is the same, those strung on a Strat-style vibrato or a Bigsby unit will have a slightly looser, spongier feel and be easier to bend than strings on a wrap-over or Tele bridge or similar.
What is the difference between Nashville and ABR-1 bridge?
The Nashville style bridge is similar to the ABR and is found on many more Gibson guitars than the ABR-1. The main difference between the two bridges is in their widths and how they are mounted to the body.
When should I replace my guitar bridge?
Don’t try to repair an old bridge on your own. Once a bridge is cracked or warped, it needs to be replaced with a new one to make your guitar sound good again.
Why choose Compton compensated custom bridges?
Compton Compensated Custom Bridges are made in the USA from solid Stainless Steel, Copper, Brass, Aluminum and Titanium. Using solid material gives your guitar the sustain, tone and clarity you have been searching for. The concept of the solid bridge is to eliminate all the small parts that contribute to tone and sustain loss.
What bridges will fit on a Gretsch?
These bridges will install on Gretsch, Gibson, Guild, Fender and most other guitars with posts spacing of 2.9 (73.66mm) or 3.0 (76.66mm). The Brass bridge is also available to match your fret board radius of 9.5″ or 12” radius.
What are the Compton bridges made of?
The Compton Bridges are made from 5 different metals each with their own tone characteristics. All bridges are drilled with a number 18 drill bit which is .1695 inches (4.30mm).
What size drill bit do I need for a Compton Bridge?
The Compton Bridges are made from 5 different metals each with their own tone characteristics. All bridges are drilled with a number 18 drill bit which is .1695 inches (4.30mm). If your guitar bridge holes have a diameter of 6mm please specify this on the order form.