What sizes do drawer pulls come in?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another).
Can you change the size of drawer pulls?
One of the most common problems with changing the hardware on older pieces is when drawer holes don’t fit standard pulls. While it takes a little effort, you can easily move or resize hardware holes and still pull of a professional finish.
What can I use instead of drawer pulls?
Plastic toys from the dollar store or thrift shop are great pieces to start with. The plastic is softer and very forgiving if you end up needing to take a few tries to get the hole drilled out. They are somewhat large for your basic door knob or drawer pull, but could work on the right piece.
What size hardware do I need for a 30 inch drawer?
Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter. Large Drawers that are 30” to 48″will require a pull that is longer than 8″ or a knob that is 1″ in diameter or greater. Using two pulls or knobs for a large drawer also works great.
How do you know what size pulls for cabinets?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
How do I know what size drawer pull I Need?
Measure the distance from the center of one screw hole to the center of the other screw hole to find your on center measurement. Find a drawer pull, knob or cabinet handle that will fit your cabinetry based on the on center dimensions, perfect for replacing old hardware or retrofitting furniture. DP413D – 8″ Square Leather Drawer Pull – 50% OFF!
Where can I get free shipping on drawer pulls?
Get free shipping on qualified 6 in. Drawer Pulls or Buy Online Pick Up in Store today in the Hardware Department. #1 Home Improvement Retailer Store Finder Truck & Tool Rental
Where can I buy antique drawer pulls and bails?
Drawer Pulls and Bail Pulls When you have antique or vintage furniture to restore, you probably need to replace some of the drawer pulls or bail pulls. If that’s your story, you’ve certainly come to the right place – Kennedy Hardware – with our massive selection of reproduction antique drawer pulls and bails.
How do you find the on center of a drawer?
Measure the distance from the center of one screw hole to the center of the other screw hole to find your on center measurement. Find a drawer pull, knob or cabinet handle that will fit your cabinetry based on the on center dimensions, perfect for replacing old hardware or retrofitting furniture. 5/8″ (16 mm)